 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPC1390 Single Pole OptoMOS(R) Relay Parameter Peak Blocking Voltage Load Current Max On-resistance Rating 400 140 22 Units VP mA Description The CPC1390G is a single-pole normally-open (1-Form-A) Solid State Relay with an enhanced input to output isolation barrier of 5000Vrms. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Features 5000Vrms Input/Output Isolation 400VP Blocking Voltage 100% Solid State Small 4-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * * * * * Approvals * UL Recognized Component: File # E76270 * EN/IEC 60950 Compliant * CSA Certified Component: Certificate # 1172007 Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part Number CPC1390G CPC1390GV CPC1390GR CPC1390GRTR Description 4-Pin DIP (100/Tube) 4-Pin DIP V-Bend (100/Tube) 4-Pin Surface Mount (100/Tube) 4-Pin Surface Mount (1000/Reel) Pin Configuration + Control 1 4 Load - Control 2 3 Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1390-R04 CPC1390 Absolute Maximum Ratings Parameter Peak Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 400 5 50 1 100 550 5000 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mW/C Derate Linearly 3.00 mW/C Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameters Output Characteristics @ 25C Load Current Continuous Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Conditions Symbol Min Typ Max Units t=10ms IL=140mA VL=400V IL ILPK RON ILEAK TON TOFF COUT IF IF VF IR CI/O 0.2 0.9 - 14 25 0.7 0.65 1.2 3 140 400 22 1 1 0.5 2 1.4 10 - mA A IF=5mA, VL=10V IF=0mA, VL=50V, f=1MHz IL=140mA IF=5mA VR=5V - ms pF mA mA V A pF 2 www.clare.com R04 CPC1390 PERFORMANCE DATA* CPC1390 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA) CPC1390 Typical On-Resistance Distribution (N=50, TA=25C, IL=140mADC, IF=5mA) CPC1390 Typical Blocking Voltage Distribution (N=50, TA=25C) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 13.0 13.5 14.0 14.5 15.0 15.5 441.5 450.5 459.5 468.5 477.5 486.5 On-resistance () Blocking Voltage (VP) 25 20 15 10 5 0 CPC1390 Typical IF for Switch Operation (N=50, TA=25C, IL=140mADC) 25 20 15 10 5 0 CPC1390 Typical IF for Switch Dropout (N=50, TA=25C, IL=140mADC) 25 20 15 10 5 0 CPC1390 Typical Turn-On Time (N=50, TA=25C, IL=100mADC, IF=5mA) Device Count (N) Device Count (N) Device Count (N) 0.66 0.68 0.70 0.72 0.74 0.76 0.63 0.64 LED Current (mA) 0.65 0.66 0.67 LED Current (mA) 0.68 0.26 0.29 0.32 0.35 Turn-On (ms) 0.38 0.41 25 Device Count (N) 20 15 10 5 0 CPC1390 Typical Turn-Off Time (N=50, TA=25C, IL=100mADC, IF=5mA) Load Current (mA) 180 160 140 120 100 80 60 CPC1390 Typical Load Current vs. Temperature (IF=2mA) On-Resistance () 30 25 20 15 10 5 CPC1390 Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature, IF=2mA) 0.091 0.095 0.099 0.103 Turn-Off (ms) 0.107 0.111 -40 -20 0 20 40 60 80 Temperature (C) 100 120 -40 -20 0 20 40 60 80 100 Temperature (C) 25 20 CPC1390 Typical On-Resistance vs. Temperature (IL=100mA Instantaneous, IF=2mA) 0.035 0.030 Leakage (A) 0.025 0.020 0.015 0.010 0.005 CPC1390 Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=400V) Blocking Voltage (VP) -20 0 20 40 60 80 100 CPC1390 Typical Blocking Voltage vs. Temperature 480 475 470 465 460 455 450 -40 -20 0 20 40 60 80 100 Temperature (C) On-Resistance () 15 10 5 -40 -20 0 20 40 60 80 100 120 0 -40 Temperature (C) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.clare.com 3 CPC1390 PERFORMANCE DATA* CPC1390 Typical Turn-On vs. Temperature (IL=100mADC) IF=5mA Turn-Off (ms) 0.5 Turn-On (ms) 0.4 0.30 0.25 0.20 0.15 0.10 0.05 0.00 LED Forward Voltage Drop (V) 0.6 0.35 CPC1390 Typical Turn-Off vs. Temperature (IL=100mADC, IF=5mA) CPC1390 Typical LED Forward Voltage Drop vs. Temperature 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 IF=50mA IF=10mA IF=5mA IF=10mA 0.3 0.2 0.1 0 -40 -20 0 20 40 60 80 Temperature (C) 100 120 -40 -20 0 20 40 60 Temperature (C) 80 100 0.40 0.35 Turn-On (ms) CPC1390 Typical Turn-On vs. LED Forward Current (TA=25C, IL=140mADC) 0.12 0.10 0.08 0.06 0.04 0.02 0 CPC1390 Typical Turn-Off vs. LED Forward Current (TA=25C, IL=140mADC) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 CPC1390 Typical IF for Switch Operation vs. Temperature (IL=100mADC) 0.25 0.20 0.15 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) Turn-Off (ms) 0.30 0 5 10 15 20 25 30 35 40 Forward Current (mA) 45 50 -40 -20 0 20 40 60 80 100 Temperature (C) 3.0 2.5 LED Current (mA) 2.0 1.5 1.0 0.5 0 -40 CPC1390 Typical IF for Switch Dropout vs. Temperature (IL=100mADC) Load Current (mA) 150 100 CPC1390 Typical Load Current vs. Load Voltage (TA=25C, IF=5mA) CPC1390 Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s 50 0 -50 -100 -20 0 20 40 60 80 100 Temperature (C) -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R04 CPC1390 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Pin DIP ("G" Suffix) 0.991 (0.039) 6.350 0.127 (0.250 0.005) 3.30 0.050 (0.130 0.002) 0.254 (0.010) PC Board Pattern (Top View) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) PIN 1 4.572 0.127 (0.180 0.005) 9 (ALL) 0.457 0.076 (0.018 0.003) 2.540 0.127 (0.100 0.005) 9 (ALL) 1.651 (0.065) 0.508 (0.020) 3.175 (0.125) 9.144 0.508 (0.360 0.020) 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) Dimensions mm (inches) 4-Pin DIP "GV" Package 0.254 (0.010) 0.991 (0.039) 3.30 0.050 (0.130 0.002) 10.160 0.508 (0.400 0.020) PC Board Pattern (Top View) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005) 6.350 0.050 (0.250 0.002) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 10.160 0.127 (0.400 0.005) 4.572 0.050 (0.180 0.002) 9 (ALL) 0.457 0.076 (0.018 0.003) 2.540 0.050 (0.100 0.002) Pin 1 9 (ALL) 1.651 (0.065) 0.127 (0.005) 2.92 (0.115) Dimensions mm (inches) R04 www.clare.com 5 CPC1390 4-Pin Surface Mount ("GR" Suffix) 2.540 0.127 (0.100 0.005) 3.300 0.050 (0.130 0.002) Recommended PCB Land Pattern 0.635 0.254 (0.025 0.010) 6.350 0.127 (0.250 0.005) 9.525 (0.375) 7.620 0.254 (0.300 0.010) 2.287 (0.09) 8.80 (0.346) 1.60 (0.063) PIN #1 0.991 (0.039) 9 1 (ALL) 2.540 0.127 (0.100 0.005) 2.287 0.127 (0.090 0.005) 0.102 min / 0.254 max (0.004 min / 0.010 max) 4.572 0.127 (0.180 0.005) 3.480 0.076 (0.137 0.003) 0.254 (0.010) 0.95 (0.037) Dimensions mm (inches) Tape and Reel Packaging for 4-Pin Surface Mount Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W = 16.00 (0.630) K0 = 4.20 (0.165) K1 = 3.70 (0.146) P = 12.00 (0.472) A0 = 10.01 (0.394) B0 = 5.00 (0.197) Dimensions mm (inches) Embossed Carrier Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1390-R04 (c)Copyright 2009, Clare, Inc. All rights reserved. Printed in USA. 3/9/09 6 |
Price & Availability of CPC1390G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |